MY DOUBLE BASS

Built by Mel Laraway
Using Australian Timbers


$ Bass Photos 1966 1.jpg
$ Bass Photos 1966 2.jpg
$ Bass Photos 1966 3.jpg
$ Bass Photos 1966 4.jpg
bass checking cenre line.jpg

Bass gluing inner rib.jpg
bass Mould and blocks.jpg
Bass + Mel.jpg
bass adding shim to end neck.jpg
Bass Back build up .jpg

Bass Back build up trimmed.jpg
Bass Back glued and clamped.jpg
Bass Back glued on.jpg
Bass Back Glued.jpg
Bass Bar glued and clamped 1.jpg

Bass Bar glued and clamped 2.jpg
Bass Bar glued and clamped 3.jpg
Bass Bar glued and clamped 4.jpg
Bass Bar glued and clamped 5.jpg
Bass Blocks cut down.jpg

Bass Build up.jpg
Bass Construction 10.jpg
Bass Construction 11.jpg
Bass Construction 6.jpg
Bass Construction 9.jpg

Bass Crack 1.jpg
Bass Crack 2.jpg
Bass Crack 3.jpg
Bass Crack 4.jpg
Bass Crack 5.jpg

Bass Crack 6.jpg
Bass early test fit neck to mold 1.jpg
Bass early test fit neck to mold 2.jpg
Bass fitting neck to slot 1.jpg
Bass fitting neck to slot 2.jpg

Bass fitting neck to slot 3.jpg
Bass fitting top 1.jpg
Bass fitting top.jpg
Bass Front glued 3.jpg
Bass Front glued and clamped 1.jpg

Bass Front glued and clamped 4.jpg
Bass Front glued and clamped 5.jpg
Bass glue and clamp inner beading 1.jpg
Bass glue and clamp inner beading.jpg
Bass glueing + clamping ribs (1).jpg

Bass glueing + clamping ribs (2).jpg
Bass glueing + clamping ribs (3).jpg
Bass glueing + clamping ribs (4).jpg
Bass glueing + clamping ribs (5).jpg
Bass glueing + clamping ribs (6).jpg

Bass glueing + clamping ribs (7).jpg
Bass glueing + clamping ribs .jpg
Bass glueing finger board to neck 1.jpg
Bass glueing finger board to neck 2.jpg
Bass glueing finger board to neck 3.jpg

Bass glueing ribs (1).jpg
Bass glueing ribs (2).jpg
Bass glueing ribs (3).jpg
Bass glueing ribs .jpg
Bass glueing ribs.jpg

bass Glueing Shims to neck.jpg
Bass Gluing inner beading + clamps.jpg
Bass Heater Bar Aluminium extension.jpg
Bass Holding sides in 1.jpg
Bass Holding sides in 2.jpg

Bass holding sides in 3.jpg
Bass in Shed.jpg
Bass Inner mold blocks and outer beading.jpg
Bass Jad and Michelle Help .jpg
Bass Mould 1.jpg

Bass Mould 2.jpg
Bass Mould 3.jpg
Bass Mould 4.jpg
Bass mould holds shape .jpg
Bass Mould to hold shape of ribs 1.jpg

Bass Mould to hold shape of ribs 2.jpg
BASS Neck 1.jpg
BASS Neck 2.jpg
BASS Neck 3 Scroll.jpg
BASS Neck 4 Scroll.jpg

BASS Neck 5 Tuner slot.jpg
Bass removing mold.jpg
Bass Ribs .jpg
Bass shaping cutout under fingerboard 1.jpg
Bass shaping cutout under fingerboard 2.jpg

Bass shaping cutout under fingerboard 3.jpg
Bass shaping cutout under fingerboard 4.jpg
Bass shaping fingerboard 1.jpg
Bass shaping fingerboard 2.jpg
Bass shaping fingerboard 3.jpg

Bass shaping macine slot 1.jpg
Bass shaping macine slot 2.jpg
Bass shaping neck 2.jpg
Bass shaping tail piece string slots 1.jpg
Bass shaping tail piece string slots 2.jpg

Bass shaping tail piece string slots 3.jpg
Bass Shaping top block and slot 1.jpg
Bass Shaping top block and slot 3.jpg
Bass Shaping top block and slot 4.jpg
Bass shaping under tail piece .jpg

Bass shaping under tail piece 1.jpg
Bass shaping under tail piece 2.jpg
Bass shaping under tail piece 3.jpg
Bass shaping under tail piece 4.jpg
bass shims.jpg

Bass Strenthen.jpg
bass tail piece reinforce.jpg
Bass test assembly.jpg
Bass testing neck fit to slot.jpg
Bass trial fit neck 2.jpg

Bass Trim rib overhangs.jpg
Cutting neck slot.jpg
MY BASS (1)Back.jpg
MY BASS (2) Front.jpg
MY BASS (3) Neck.jpg

MY BASS (4)neck.jpg
MY BASS top thinned.jpg